ASTM B161 Pipes manufacturer & exporter

Nickel Alloys

PRODUCTS


Worldmap | Suppliers of Stainless Steel Industrial & Construction Products Worldwide
We are industrial suppliers of Nickel Alloy 200 Products
 

Home / Products / Nickel Alloys / 254 SMO / ASTM A813 254 SMO Welded Pipe

254 SMO (UNS S31254)

 

ASTM A813 254 SMO Welded Pipe

Specifications

Standards Designation
ASTM A 813
ASME SB 813

ASTM A813 254 SMO Welded Pipe Inventory Stock at factory rate:-

NB Sizes Sch 5 Sch 10 Sch 40 Sch 80 Sch 160
1/8″ available available available available
1/4″ available available available available
3/8″ available available available available
1/2″ available available available available available
3/4″ available available available available available
1″ available available available available available
1 1/4″ available available available available available
1 1/2″ available available available available available
2″ available available available available available
2 1/2″ available available available available available
3″ available available available available available
4″ available available available available available
5″ available available available available
6″ available available available available

Enquiry

Dimensions

Specifications

Alloy Common Name Related Specifications Tensile Strength Proof Stress Elongation
British European United States
Alloy 254 254SMO   1.4547 ASTM A479/A473,
/A240 S31254
F44
655
[95]
305
[44.2]
35

Specifications of Alloy 254
  • Alloy 254 to MLA-MPS-254-BAR
  • ASTM A479 Bar UNS S31254
  • ASTM A276 Bar UNS S31254
  • ASTM A182 Forgings UNS S31254 F44
  • ASTM A240 Plate S31254

Chemical Specification of Alloy 254

Elements C Cr Fe Mo Mn N Ni Nb P S Si V
Minimum   19.5 REMAINDER 6.0   0.18 17.5          
Maximum 0.02 20.5   6.5 1.0 0.22 18.5   0.03 0.01 0.8  

Basic Properties of Alloy 254- Mechanical Properties

0.2% Proof Stress (N/mm2 )[ksi] minimum 300 [43.5]
Ultimate Tensile Strength (N/mm2) [ksi] minimum 650[94.2]
Elongation (%) minimum 35
Hardness (HBN) 270 max
Reduction of Area(%) minimum 50

Physical Properties of Alloy 254

Density (Kg.m-3) 8000
Magnetic Permeability <1.05
Young’s Modulus (N/mm2) 200 x 103
Specific Heat 20°C (J.Kg-1.°K-1) 500
Electrical resistance, 20°C (µ.O.m) 0.85
Thermal conductivity, 20°C (W.m-1.°K-1) 13.5

 

Machining Advice of Alloy 254 - Hot worked and precipitation hardened

Operation Cutting Speed m/min (ft/min) Feed Rate
mm/rev (in/rev)
Depth of cut mm (in)
Milling 18 (58) 0.13-0.25 mm/tooth
0.005-0.010 in/tooth
0.2-3.0 (0.007-0.12)
Drilling 6.4mm(1/4") dia 250rpm 0.075(0.003)  
Drilling 12.7mm(1/2") dia 250 rpm 0.125(0.005)  
Drilling 25.4mm(1") dia 150 rpm 0.28(0.011)  
Turning - Roughing 30 - 45 ( 100 - 150 ) 0.4-0.5 (0.015-0.020) 2.5 (0.1)
Turning - Finishing 50 - 60 ( 165 - 200 ) 0.13-0.20 (0.005-0.008) 0.5 (0.02)
Tooling

Milling/Turning: Carbide (SANDVIK GC 235, SECO T25M)

Drilling: HSS, point angle 118°, chisel angle 120°

Alloy Comparisons

Alloy Comparisons S20910 S32205 N05500 S31254 FERRALIUM 255-SD50
(0.2% Proof Strength, N/mm2) 420 510 690 325 610

Corrosion Rate (mm.y-1)Seawater

<0.01 <0.01 <0.18 <0.01 <0.01

Corrosion Rate (mm.y-1)10% sulphuric acid at 80°C

0.7 0.4 0.1 <0.15 <0.15

Corrosion Rate (mm.y-1) Boiling 50% nitric acid

0.18 <0.15 0.15 <0.15 <0.15
Wear Properties related to Hardness (HRC) RC27 RC25 RC20 RC27 RC27

 

Main Export Market

  • Eastern Europe
  • North America
  • Mid East/Africa
  • Central/South America
  • Asia
  • Western Europe
  • Australasia
  • UAE

Sales Locations

U.A.E,
Oman,
Saudi Arabia,
Qatar,
Bahrain,
Egypt,
Turkey
Singapore,
Thailand,
Malaysia
Indonesia
Poland
Italy
Portugal
Spain
Brazil
Chile
Venezuela
Costa Rica
USA
Canada
Angola
Sri Lanka
Russia



     
Products
904L Grades
LTCS Grades