ASTM B366 Inconel 625 Flexolet Socket Weld manufacturer & exporter

Nickel Alloys

PRODUCTS


Worldmap | Suppliers of Stainless Steel Industrial & Construction Products Worldwide
We are industrial suppliers of Nickel Alloy 200 Products
 

Home / Products / Nickel Alloys / Inconel 625 / ASTM B366 Inconel 625 Socketweld Flex Outlets

Inconel 625 (UNS: N06625, Werkstoff Nr.: 2.4856)

We are engaged in the manufacture and supply of a wide array of Socket Welds. Our range of Socket Welds is attached in the pipe in the recessed area of the valve or flange. Our range of Socket Welds is applicable for small pipe diameters and normally for small diameter piping. Leakage proof and corrosion resistant, this range helps in joining the pipes and valves. Moreover, our range is reckoned amongst the clients for its hassle free performance.

Rajendra Industrial Corporation Flanges Godown

ASTM B366 Inconel 625 Socketweld Flex Outlets

Specifications

Standards Designation
ASTM B 366
ASME SB 366

UNS N06625
Werkstoff Nr. 2.4856

Enquiry

Dimensions

Chemical Composition

Inconel 625
Ni 58.0 min
Cr 20.0 – 23.0
Fe 5.0 max
C 0.10 max
Mn 0.50 max
Si 0.50 max
Mo 8.0 – 10.0
Co 1.0 max
Al 0.40 max
Ti 0.40 max
Nb + Ta 3.15 – 4.15
P 0.015 max
S 0.015 max

Mechanical & Physical Properties – Inconel 625

Density 8.4 g/cm3
Melting Point 1350 °C (2460 °F)
Tensile Strength Psi – 135,000 , MPa – 930
Yield Strength (0.2%Offset) Psi – 75,000 , MPa – 517
Elongation 42.5 %

Subcategory: Metal; Nickel Base; Superalloy

Key Words: ASME SB-443, SB-444, SB-446, SB-564, Boiler Code Sections I, III, VIII, IX; AFNOR NC 22 D Nb; VdTUV 499, AMS 5581, AMS 5599, AMS 5666, AMS 5837; DIN 17744, 17750-17752, 17754; Werkstoff Nr. 2.4856; NACE MR-01-75, UNS N06625; BS 3072, 3074, 3076 (NA21); ASTM B443, ASTM B444, ASTM B446, ASTM B564, ASTM B704, ASTM B705, ASTM B751

Component
Al
C
Co
Cr
Fe
Wt. %
Max 0.4
Max 0.1
Max 1
20 - 23
Max 5
Component
Mn
Mo
Nb
Ni
Wt. %
Max 0.5
8 - 10
3.15 - 4.15
Min 58

Electrical Properties
Electrical Resistivity 0.000129 ohm-cm 0.000129 ohm-cm  
Magnetic Permeability 1.0006 1.0006  at 200 oersted (15.9 kA/m)
Curie Temperature Max -196 °C Max -321 °F  
Thermal Properties
CTE, linear 20°C 12.8 µm/m-°C 7.11 µin/in-°F  20-100°C
Heat Capacity 0.41 J/g-°C 0.098 BTU/lb-°F  
Thermal Conductivity 9.8 W/m-K 68 BTU-in/hr-ft²-°F  
Melting Point 1290 - 1350 °C 2350 - 2460 °F  
Solidus 1290 °C 2350 °F  
Liquidus 1350 °C 2460 °F  

 

Main Export Market

  • Eastern Europe
  • North America
  • Mid East/Africa
  • Central/South America
  • Asia
  • Western Europe
  • Australasia
  • UAE

Sales Locations

U.A.E,
Oman,
Saudi Arabia,
Qatar,
Bahrain,
Egypt,
Turkey
Singapore,
Thailand,
Malaysia
Indonesia
Poland
Italy
Portugal
Spain
Brazil
Chile
Venezuela
Costa Rica
USA
Canada
Angola
Sri Lanka
Russia

 

     
Products
904L Grades
LTCS Grades