Home / Products / Nickel Alloys / Inconel 718 / ASTM B670 Inconel 718 Sheets
INCONEL® alloy 718 (UNS N07718, Werkstoff Nr. 2.4668)
Being one of the leading companies, we are engaged in offering a wide range of Inconel 718 Sheet to meet the needs of our clients. These bars are sturdily constructed and are offered in different sizes, grades, hardness and dimensions as per the needs of our customers. Our products are admired for their sturdiness and high functional efficiency.
ASTM B670 Inconel 718 Sheets
Specifications
| Standards | Designation |
| ASTM | B 670 |
| ASME | SB 670 |
| Standard | Inconel 718 |
|---|---|
| UNS | N07718 |
| Werkstoff Nr. | 2.4668 |
ASTM B670 Inconel 718 Sheets Inventory Stock at factory rate:-
| Sizes | Availability |
|---|---|
| 0.4mm |  |
| 0.5mm | |
| 0.8mm | |
| 1mm | |
| 1.2mm | |
| 1.6mm | |
| 2mm | |
| 3mm | |
| 4mm | |
| 5mm | |
| 6mm | |
| 8mm | |
| 10mm | |
| 12mm | |
| 16mm | |
| 20mm | |
| 25mm | |
Dimensions
Chemical Composition
| Inconel 718 | |
| Ni | 50 – 55 |
| Fe | Bal |
| Cr | 17 – 21 |
| Cu | 0.3 max |
| Mo | 2.8 – 3.3 |
| Nb | 4.75 – 5.5 |
| C | 0.08 max |
| Mn | 0.35 max |
| P | 0.015 max |
| S | 0.015 max |
| Si | 0.35 max |
| Ti | 0.65 – 1.15 |
| Al | 0.2 – 0.8 |
| Co | 1.0 max |
| B | 0.006 max |
Mechanical & Physical Properties – Inconel 718
| Density | 8.2 g/cm3 |
| Melting Point | 1350 °C (2460 °F) |
| Tensile Strength | Psi – 135,000 , MPa – 930 |
| Yield Strength (0.2%Offset) | Psi – 70,000 , MPa – 482 |
| Elongation | 45 % |
Specifications
| Form | Standard |
|---|---|
| Metal Type | UNS N07718 |
| Bar | ASTM B637 AMS 5662 AMS 5663 AMS 5664 PWA 1009 PWA 1010 GE B50TF15 |
| Wire | AMS 5832 |
| Sheet | ASTM B670 AMS 5596 AMS 5597 PWA 1033 GE B50TF14 ASTM B670 ASTM B637 |
| Plate | ASTM B670 AMS 5596 AMS 5597 PWA 1033 GE B50TF15 ASTM B670 ASTM B637 |
Tube |
AMS 5589 AMS 5590 |
Pipe |
AMS 5589 AMS 5590 |
| Fitting | - |
| Forging | ASTM B637 AMS 5562 AMS 5663 AMS 5664 PWA 1009 PWA 1010 GE B50TF15 |
| Weld Wire | A5.14 ERNiFeCr-2 |
Weld Electrode |
- |
| Din | 2.4668 |
Subcategory: Metal; Nickel Base; Superalloy
Key Words: IN718, INCONEL 718, AFNOR NC 19 Fe Nb, UNS N07718; ASTM B637, B670; ASME Boiler Code Sections I, III; AMS 5589, AMS 5590, AMS 5596, AMS 5597, AMS 5662, AMS 5663, AMS 5664, AMS 5832, Werkstoff Nr. 2.4668; WL Nr. 2.4668; MIL-N-24469; NACE MR-01-75; AECMA Pr EN 2404, 2405, 2407, 2408, 2952, 2961, 3219
| Component Wt. % Al 0.2 - 0.8 B Max 0.006 C Max 0.08 Co Max 1 Cr 17 - 21 |
4.75-5.5 Component Wt. % Cu Max 0.3 Fe 17 Mn Max 0.35 Mo 2.8 - 3.3 Nb |
Component Wt. % Ni 50 - 55 P Max 0.015 S Max 0.015 Si Max 0.35 Ti 0.65 - 1.15 |
Forms: round, flat, extruded section, pipe, tube, forging stock, plate, sheet, strip and wire.
| Electrical Properties | |||
| Electrical Resistivity | 0.000125 ohm-cm | 0.000125 ohm-cm | |
| Magnetic Permeability | 1.0011 | 1.0011 | at 200 oersted (15.9 kA/m) |
| Curie Temperature | -112 °C | -170 °F | |
Thermal Properties |
|||
| CTE, linear 20°C | 13 µm/m-°C | 7.22 µin/in-°F | 20-100°C |
| Heat Capacity | 0.435 J/g-°C | 0.104 BTU/lb-°F | |
| Thermal Conductivity | 11.4 W/m-K | 79.1 BTU-in/hr-ft²-°F | |
| Melting Point | 1260 - 1336 °C | 2300 - 2440 °F | |
| Solidus | 1260 °C | 2300 °F | |
| Liquidus | 1336 °C | 2440 °F | |
Main Export Market
- Eastern Europe
- North America
- Mid East/Africa
- Central/South America
- Asia
- Western Europe
- Australasia
- UAE
U.A.E,
Oman,
Saudi Arabia,
Qatar,
Bahrain,
Egypt,
Turkey
Singapore,
Thailand,
Malaysia
Indonesia
Poland
Italy
Portugal
Spain
Brazil
Chile
Venezuela
Costa Rica
USA
Canada
Angola
Sri Lanka
Russia
