Nickel 200 is technically pure nickel with good mechanical properties and excellent resistance to alkali hydroxides as well as organic compositions. Even when exposed to high temperature.

Please note: we may supply special diameters in small quantities at request

Select Pipe Nickel Pipe Monel Pipe Duplex Stainless Steel Pipe Hastelloy Pipe Inconel Pipe Incoloy Pipe Stainless Steel Pipe Carbon Steel Pipe

 

Related Information to nickel 200 pipe

nickel 200 tube

Nickel 200 and Nickel 201 are solid solution strengthened, commercially pure wrought materials with good mechanical properties over a wide range of temperatures and excellent resistance to many corrosives, in particular hydroxides. Nickel 201 was a modification of 200 to control carbon (.02 max) which keeps it from being embrittled by intergranular precipitates at temperatures of 600° F to 1400° F in many processes. Typically, the elemental restrictions of both, nickel 200 and nickel 201, are combined into one, dual-certified chemistry resulting in a single alloy with the desired characteristics of both alloys, Nickel 200/201.

Click here to know more about Nickel Tube

nickel 200 sheet

Both Nickel 200 and 201 offer corrosion resistance in reducing and neutral media as well as in oxidizing atmospheres provided that the oxidizing media allows the formation of a passive oxide film. This oxide film accounts for the materials excellent resistance in caustic environments. Corrosion rates in both marine and rural atmospheres are very low. The resistance of Nickel 200/201 to corrosion by distilled and natural waters is excellent.

Nickel 200 flanges

Good resistance to corrosion in acids and alkalis and is most useful under reducing conditions. Outstanding resistance to caustic alkalis up to and including the molten state. In acid, alkaline and neutral salt solutions the material shows good resistance, but in oxidizing salt solutions severe attack will occur. Resistant to all dry gases at room temperature and in dry chlorine and hydrogen chloride may be used in temperatures up to 550 °C. Resistance to mineral acids varies according to temperature and concentration and whether the solution is aerated or not. Corrosion resistance is better in de-aerated acid.

Alloy 625 pipe

We are industrial suppliers for Nickel Alloy 625 tubing and pipe,

Product Information for Nickel Alloy 625 tubing and pipe

Nickel Alloy 625 Product Range

inconel 200 / Nickel 200

Nickel 200 is commercially pure (99.6%) wrought nickel. It has good mechanical properties and excellent resistance to many corrosive environments. Other useful features of the alloy are its magnetic and magnetostrictive properties, high thermal and electrical conductivities, low gas content and low vapor pressure.

The corrosion resistance of Nickel 200 makes it particularly useful for maintaining product purity in the handling of foods, synthetic fibers, and caustic alkalies; and also in structural applications where resistance to corrosion is a prime consideration.
Other applications include chemical shipping drums, electrical and electronic parts, aerospace and missile components and rocket motor cases.

Click here to know more about Nickel 200, we are also manufacturing Nickel 200 Flanges

alloy 625 plate

alloy 200

is inconel 625 magnetic:

Technically speaking Inconel 625 is a corrosion resistant, non magnetic, oxidation resistant nickel based alloy.