Home / Products / Nickel Alloys / Hastelloy B2 / Hastelloy B2 Fasteners
Hastelloy B2 Fasteners are one of the highly acclaimed names in the market for designing and manufacturing a comprehensive variety of stainless and duplex steel fasteners. Manufactured in accordance with set industrial norms, these fasteners are stringently checked and perfect on all quality parameters.
Hastelloy B2 Fasteners
Specifications
| Standard | Hastelloy B2 |
|---|---|
| UNS | N10665 |
| Werkstoff Nr. | 2.4617 |
Hastelloy B2 Fasteners Inventory Stock at factory rate:-
- Fasteners
- Finished Hex Nut
- Forged Nuts
- Heavy Nuts
- Hex Bolts
- Hex Head Bolts
- Stainless steel bolt
- Stainless steel eye bolts
- Stainless steel nuts
- Stainless steel u bolts
- Stud bolts suppliers
- Stainless steel lag bolts
- Stainless steel metric bolts
- Stainless steel toggle bolts
- Stainless steel countersunk bolts
- UNC stainless steel bolts
- Hex Nuts
- B7 Studs and 2H Nuts
- SS bolts
- Hexagon Head Bolts
- Hexagonal Bolt
- Hexagonal Nut
- Stud Nuts
- Gasket Nuts
- Long Nut
- Machine Nuts
- Stud Bolts
- T Bolt
- T-Nut
- Pipe Nut
- Dome Nuts
- Bolts
- Cap Nuts
- Slotted Nuts
- Square Head Bolts
- Stainless Bolt
- Stainless Steel Nut
- Steel Nuts
- Structural Bolts
- Machine Screws
- Machine Washers
- Bolt Fasteners
- Resistant Screws
- Cap Screws
- Sheet Metal Fasteners
- Socket Cap Screw
- Spring Washer
- Square Head Screw
- Stainless Steel Pipe Cap
- Stud Anchors
- Industrial Fasteners
- Washer
- Metal Fastener
- Metal Washers
- Plain Washers
- Star Washer
- Hexagon Head Screws
- Special Drawings
- Hex Screw
- SS screws
- Flat Washers
- Hex Head Screws
- Hex Nipples
Dimensions
Chemical Composition
| Hastelloy B2 / Hastelloy B2 (UNS: N10665, Werkstoff Nr.: 2.4617) | |
| Ni | Bal |
| Mo | 26 – 30 |
| Fe | 2.0 max |
| C | 0.02 max |
| Co | 1.0 max |
| Cr | 1.0 max |
| Mn | 1.0 max |
| Si | 0.1 max |
| P | 0.04 max |
| S | 0.03 max |
Mechanical & Physical Properties – Hastelloy B2
| Density | 9.2 g/cm3 |
| Melting Point | 1370 °C (2500 ºF ) |
| Tensile Strength | Psi – 1,10,000 , MPa – 760 |
| Yield Strength (0.2%Offset) | Psi – 51000 , MPa – 350 |
| Elongation | 40 % |
