Products / Nickel Alloys / Inconel / Incoloy 825 Round Bar
What is Incoloy 825 | Incoloy 825 Principal Features | Incoloy 825 Strength | Incoloy 825 Physical Properties | Incoloy 825 Price |
- Inconel 825 Fittings
- Inconel 825 Flange
- Inconel 825 Sheet / Plate
- Inconel 825 Pipe
- Inconel 825 Round Bar
- Inconel 825 Tube
- Inconel 825 Forgings
Please note: we may supply special diameters in small quantities at request
Nickel Bar, Rod & Wire |
|||||
Sr. No. |
Material |
Diameter |
Length |
Specification |
Manufacturer |
1 |
Forged Bars |
0.5 mm to 500 mm |
50 mm To 6000 mm long |
A-479 |
Mukund, Shah Alloys, Faker, Panchmahals,
Chadan, Viraj, Bhansali & Imported |
UNS NICKEL MATERIAL GRADES |
|||
| Nickel grade | UNS | Werkstoff | DIN |
| INCOLOY 825 | UNS N08825 | 24,858 | NiCr 21 Mo |
| Note:- | |
| Grade | 304, 304L, 304H, 316, 316L, 316LN, 316Ti, 309, 310S, 317L, 321, 347, 409, 410, 420,430, 440A, 440B, 440C, 446, 202 Etc. |
| Other Special Grade | Duplex Steel (2507, 2205, 329L), Stainless Steel 17-4 PH (630 Gr.) 15.5 PH, 17.7 PH, 4122 Etc. |
| Finishing | Bright, Polish & Black |
| In Form of | Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wiremesh, Billet, Block, Ingot, Forging Etc. |
| Hardness for Wire | Soft, Hard, Half Hard Etc. |
| Value Added Service | Machining (CNC), Centreless Grinding (CG), Heat Treatment, Annealed, Pickled, Polish, Rolling, Forging, Cutting, Bending, Minor Fabrication, |
| Test Certificate | Manufacturer Test Certificate / Laboratory Test Certificate from Govt. Approved Lab / Under Third Party Inspection |
| Specialize | 440C, CG, Forging, Wiremesh etc |
| Incoloy 825 Round Bar Application | ||||||
| Incoloy 825 Round Bar Uses |
|
|||||
| Incoloy 825 Round Bar Order & Packing Information | ||||||
| Min. Order: 10 Pieces (or please enquire for your customized order) Trade Terms: FOB, CIF Payment Terms: L/C, T/T Packing: as per requirement Place of Origin: Mumbai, India Means of Transport: Land, Ocean Delivery Date: one or two week Package: in wooden crate with plastic caps on each end. |
||||||
| Nickel Alloy & Inconel Bar Grades | Nickel Alloy & Inconel Bar Specifications | Nickel Alloy & Inconel Bar Sizes |
| Nickel 200 Round Bar: | ASTM B160 | Diameter: 0.5 mm
to
500 mm Length: 50 mm To 6000 mm long |
| Monel 400 Round Bar | AMS 4675, ASTM B164, QQN-281 CL A |
Diameter: 0.5 mm
to
500 mm Length: 50 mm To 6000 mm long |
| Monel 405 Round Bar | AMS 4674 QQN 281 CL B ASME B164 CL B |
Diameter: 0.5 mm
to
500 mm Length: 50 mm To 6000 mm long |
| Monel 405 Hex Bar | AMS 4674 QQN 281 CL B ASME B164 CL B |
Diameter: 0.5 mm
to
510 mm Length: 50 mm To 6000 mm long |
| Inconel 600 Round Bar Inconel 600 Inconel Forged Bar |
AMS 5665, ASTM B166, ASME SB166 MIL-N-6710 AMD .2, AMS 5687, QQ-W-390C |
Diameter: 0.5 mm
to
499 mm Length: 50 mm To 6000 mm long |
| Inconel 601 Round Bar Inconel 601 Forged Bar |
AMS 5715, ASTM B166, ASME SB166, DIN 17725, DIN 17754 |
Diameter: 0.5 mm
to
500 mm Length: 50 mm To 6000 mm long |
| Inconel 625 Round Bar Pyromet 625 Inconel 625 Forged Bar |
AMS 5666, ASTM B446 Grd 1 | Diameter: 0.5 mm
to
500 mm Length: 50 mm To 6000 mm long |
| Inconel 718 Flat Bar Inconel 718 Round Bar Pyromet 718 Round Bar Inconel 718 Forged Bar |
ASTM B637, ASME SB637, AMS 5662, AMS 5663, AMS 5962, AMS 5664, RBO-170-153 Mod, VMS-110, B50TF15 CL D, SPS-M-275 B50T69A, C50TF13, DMS-2209 AIC-MS-110, EN 2404 |
Diameter: 0.5 mm
to
500 mm Length: 50 mm To 6000 mm long |
| Inconel 718 Cold Reduced Round Bar Inconel 718 Flat Bar |
AIC-MS-110 DMS-2209 AMS-5662, HI SHEAR #156 AMS-5962 (7-99 TO PRESENT) SPS-M-637, B50TF15 , VMS-110 C50TF13 |
Diameter: 0.5 mm
to
470 mm Length: 50 mm To 7000 mm long |
| Inconel X750 Round Bar Inconel X750 Forgings |
AMS 5667, B50YP44B1, AMS 5668 AMS 5670, AMS 5671, ASTM B637 ASME SB637, EN 10269 |
Diameter: 0.5 mm
to
500 mm Length: 50 mm To 6000 mm long |
| Inconel 800 /800HT Round Bar | ASTM B408, ASME SB408 AMS 5766 BS 3076NA15, ASME SA408 |
Diameter: 0.5 mm
to
500 mm Length: 50 mm To 6000 mm long |
| Inconel/ Incoloy 825 Round Bar | ASTM B425, ASME SB425 | Diameter: 0.5 mm
to
500 mm Length: 50 mm To 6000 mm long |
| Hastelloy C276 Round Bar | AMS 5750, ASTM B574, ASME SB574 |
Diameter: 0.5 mm
to
500 mm Length: 50 mm To 6000 mm long |
| Hastelloy X Round Bar Alloy X Round Bar |
AMS 5754 | Diameter: 0.5 mm
to
500 mm Length: 50 mm To 6000 mm long |
| AERMET 100 Round Bar | AMS-6532 MIL-STD-2154 TYPE 1 CL A MIL-STD-2154 CL. A MMS-217 |
Diameter: 0.5 mm
to
500 mm Length: 50 mm To 6000 mm long |
|
|
Incoloy Hex Bar We can supply hex bar in all grades & size. Grade: Inconel 625 & all Inconel Grades, SS 304, 304L, 304H, 316, 316L, 316LN, 316Ti, 309, 310S, 317L, 321, 347, 409, 410, 420,430, 440A, 440B, 440C, 446, 202 Etc.
|
More useful information
A rebar (short for reinforcing bar), also known as reinforcing steel, reinforcement steel, rerod, a deformed bar, reo, or reo bar, is a common steel bar, and is commonly used as a tensioning device in reinforced concrete and reinforced masonry structures holding the concrete in compression. It is usually in the form of carbon steel bars or wires, and the surfaces may be deformed for a better bond with the concrete.
Sizes and grades
U.S. sizes
Imperial bar designations represent the bar diameter in fractions of ⅛ inch, such that #8 = 8⁄8 inch = 1 inch diameter. Area = (bar size/9)^2 such that area of #8 = (8/9)^2 = 0.79 inch squared. This applies to #8 bars and smaller. Larger bars are sized to correspond to square bars that were formerly used.
| Imperial
Bar Size |
"Soft"
Metric Size |
Weight per unit length
(lb⁄ft) |
Mass per unit length
(kg/m) |
Nominal Diameter
(in) |
Nominal Diameter
(mm) |
Nominal Area
(in²) |
Nominal Area
(mm²) |
|---|---|---|---|---|---|---|---|
| #3 | #10 | 0.376 | 0.561 | 0.375 = ⅜ | 9.525 | 0.11 | 71 |
| #4 | #13 | 0.668 | 0.996 | 0.500 = ½ | 12.7 | 0.20 | 129 |
| #5 | #16 | 1.043 | 1.556 | 0.625 = ⅝ | 15.875 | 0.31 | 200 |
| #6 | #19 | 1.502 | 2.24 | 0.750 = ¾ | 19.05 | 0.44 | 284 |
| #7 | #22 | 2.044 | 3.049 | 0.875 = ⅞ | 22.225 | 0.60 | 387 |
| #8 | #25 | 2.670 | 3.982 | 1.000 | 25.4 | 0.79 | 509 |
| #9 | #29 | 3.400 | 5.071 | 1.128 | 28.65 | 1.00 | 645 |
| #10 | #32 | 4.303 | 6.418 | 1.270 | 32.26 | 1.27 | 819 |
| #11 | #36 | 5.313 | 7.924 | 1.410 | 35.81 | 1.56 | 1006 |
| #14 | #43 | 7.650 | 11.41 | 1.693 | 43 | 2.25 | 1452 |
| #18 | #57 | 13.60 | 20.284 | 2.257 | 57.3 | 4.00 | 2581 |
| #18J | 14.60 | 21.775 | 2.337 | 59.4 | 4.29 | 2678 |
Canadian sizes
Metric bar designations represent the nominal bar diameter in millimeters, rounded to the nearest 5 mm.
| Metric
Bar Size |
Mass per unit length
(kg/m) |
Nominal Diameter
(mm) |
Cross-Sectional
Area (mm²) |
|---|---|---|---|
| 10M | 0.785 | 11.3 | 100 |
| 15M | 1.570 | 16.0 | 200 |
| 20M | 2.355 | 19.5 | 300 |
| 25M | 3.925 | 25.2 | 500 |
| 30M | 5.495 | 29.9 | 700 |
| 35M | 7.850 | 35.7 | 1000 |
| 45M | 11.775 | 43.7 | 1500 |
| 55M | 19.625 | 56.4 | 2500 |
European sizes
Metric bar designations represent the nominal bar diameter in millimetres. Bars in Europe will be specified to comply with the standard EN 10080 (awaiting introduction as of early 2007), although various national standards still remain in force (e.g. BS 4449 in the United Kingdom).
| Metric
Bar Size |
Mass per unit length
(kg/m) |
Nominal Diameter
(mm) |
Cross-Sectional
Area (mm²) |
|---|---|---|---|
| 6,0 | 0.222 | 6 | 28.3 |
| 8,0 | 0.395 | 8 | 50.3 |
| 10,0 | 0.617 | 10 | 78.5 |
| 12,0 | 0.888 | 12 | 113 |
| 14,0 | 1.21 | 14 | 154 |
| 16,0 | 1.579 | 16 | 201 |
| 20,0 | 2.467 | 20 | 314 |
| 25,0 | 3.855 | 25 | 491 |
| 28,0 | 4.83 | 28 | 616 |
| 32,0 | 6.316 | 32 | 804 |
| 40,0 | 9.868 | 40 | 1257 |
| 50,0 | 15.413 | 50 | 1963 |
Australian Sizes
Reinforcement for use in concrete construction is subject to the requirements of Australian Standards AS3600-2009 (Concrete Structures) and AS/NZS4671-2001 (Steel Reinforcing for Concrete). There are other standards that also apply to testing, welding and galvanising. The designation of reinforcement is defined in AS/NZS4671-2001 using the following formats:
Bars
| Shape Code | Yield Strength (MPa) | Ductility Class | Nominal Diameter (mm) |
| D - Deformed Bar | 500 MPa | N - Normal | 10 |
| R - Round Bar | 250 MPa | L - Low | 12 |
| 16 | |||
| 20 | |||
| 24 | |||
| 28 | |||
| 32 | |||
| 36 | |||
| 40 |
EN 10080: The EN 10080: Steel for the reinforcement of concrete is an European Standard. This standard is referenced by EN 1992.
Size Range
Alloy 600 wire, bar, rod, forging, plate, sheet, tube, fastener and other standard forms are available.
Alloy 600 is a nickel-chromium alloy with excellent resistance to organic acids and is used extensively in fatty acid processing. The high nickel content of Alloy 600 provides good resistance to corrosion under reducing conditions, and its chromium content, resistance under oxidizing conditions. The alloy is virtually immune to chloride stress-corrosion cracking. It is also employed widely in the production and handling of caustic soda and alkali chemicals. Alloy 600 is also an excellent material for high-temperature applications requiring a combination of heat and corrosion resistance. The excellent performance of the alloy in hot halogen environments makes it a popular choice for organic chlorination processes. Alloy 600 also resists oxidation, carburization, and nitridation.
Corrosion resistance
Inconel 600 alloy are resistant to corrosion for a variety of corrosive media. Chromium alloy has better corrosion resistance than the Nickel 99.2 (alloy 200) and Ni 99.2 (alloy 201, a low-carbon) in the oxidation conditions. Meanwhile, the higher nickel content of the alloy make it has good corrosion resistance in reduction conditions and alkaline solution. And can effectively prevent the chlorine - iron stress corrosion cracking. Inconel 600 alloy have good corrosion resistance in acetic acid, acetic acid, YiSuan, stearic acid, organic acids, have medium corrosion resistance in inorganic acid. It has very good corrosion resistance in a nuclear reactor primary and secondary recycling of high purity water. The especially outstanding performance of Inconel 600 is resistant to dry chlorine and hydrogen chloride corrosion, the application temperature can be 650oC. At high temperatures, annealed and solution-treated state of the alloy has a very good antioxidant properties and high peel strength in air. Under high temperature, annealing state and solid solution processing mode of alloy has the very good antioxidant spalling performance and high strength in the air. The alloy resist ammonia nitrogen and permeability, carburizing atmosphere, but in REDOX conditions variations, alloy will be affected by the partial oxidation corrosion of medium (such as green death liquid)
Specifications
| Form | Standard |
|---|---|
| Metal Type | UNS N06600 |
| Bar | ASTM B166 AMS 5665 Din 17752 |
| Wire | |
| Sheet | ASTM B168 AMS 5540 Din 17750 |
| Plate | ASTM B168 AMS 5540 Din 17750 |
| Tube | ASTM B167 |
| Pipe | ASTM B167 |
| Fitting | ASTM B366 |
| Forging | ASTM B564 Din 17754 |
| Weld Wire | FM 82/ ERNiCr-3 |
| Weld Electrode | FM 182/ ENiCrFe-3 |
| Din | 2.4816 |
Specifications
Nickel - Monel® - Inconel® - Incoloy® - Hastelloy® - Alloy 20 - Duplex - Outlet Fittings are the registered trademarks of their respective owners.
→ Nickel Alloys
- Nickel Alloys
- Nickel 200
- Nickel 201
- Monel 400
- Monel K500
- Inconel 600
- Inconel 601
- Inconel 625
- Inconel 718
- Inconel X-750
- Incoloy Alloy 20
- Incoloy 330
- Incoloy 800
- Incoloy 800H
- Incoloy 800HT
- Incoloy 825
- Incoloy 825 Flanges
- Incoloy 825 Forged Flanges
- Incoloy 825 Blind Flanges
- Incoloy 825 Spectacle Blinds
- Incoloy 825 High Hub Blinds
- Incoloy 825 Orifice Flanges
- Incoloy 825 Slip-on Flanges
- Incoloy 825 Socket Weld Flanges
- Incoloy 825 Weld Neck Flanges
- Incoloy 825 Flat Flanges
- Incoloy 825 Loose Flanges
- Incoloy 825 Threaded Flanges
- Incoloy 825 Lapped joint Flanges
- Incoloy 825 Reducing Flanges
- Incoloy 825 Square Flanges
- Incoloy 825 Ring Type Joint Flanges
- Incoloy 825 Spades and Ring Spacers (part of flange connection)
- Incoloy 825 Weldo Flange / Nipo Flange
- Incoloy 825 Expander Flange
- Incoloy 825 Butt welding Fittings
- Incoloy 825 Butt- Welding Long Radius Elbow
- Incoloy 825 Butt- Welding Short Radius Elbow
- Incoloy 825 Butt- Welding 1D Elbow
- Incoloy 825 Butt- Welding 1.5D Elbow
- Incoloy 825 Butt- Welding 3D Elbow
- Incoloy 825 Butt- Welding 5D Elbow
- Incoloy 825 Butt- Welding Tee
- Incoloy 825 Butt- Welding Cross
- Incoloy 825 Butt- Welding Reducers
- Incoloy 825 Butt- Welding Concentric Reducer
- Incoloy 825 Butt- Welding Eccentric Reducer
- Incoloy 825 Butt- Welding Stub End
- Incoloy 825 Butt- Welding Lap Joint Stub Ends
- Incoloy 825 Butt- Welding Pipe Cap
- Incoloy 825 Butt- Welding Collar
- Incoloy 825 Butt- Welding Swedge Nipple
- Incoloy 825 Butt- Welding Pipe Nipples
- Incoloy 825 Butt- Welding Barrel Nipple
- Incoloy 825 Butt- Welding Reducing Nipple
- Incoloy 825 Butt- Welding Bend
- Incoloy 825 Butt- Welding Piggable Bend
- Incoloy 825 Butt- Welding Lateral
- Incoloy 825 Threaded Fittings
- Incoloy 825 Socket weld Fittings
- Incoloy 825 Pipes & Tubes
- Incoloy 825 Seamless Pipe
- Incoloy 825 Welded Pipe
- Incoloy 825 Seamless Tube
- Incoloy 825 Welded Tube
- Incoloy 825 Sheets
- Incoloy 825 Plates
- Incoloy 825 Bars
- Incoloy 825 Rods
- Incoloy 825 Wire
- Incoloy 825 Fasteners
- Hastelloy C276
- Hastelloy C22
- Hastelloy B2
- Hastelloy X
- 904L
- 254 SMO
→ PRODUCTS
- Flanges
- Butt-Welding Fittings
- Forged Fittings Type Thread Fittings
- Forged Fittings Type Socket Weld
- Fasteners
- Pipes & Tubes
- Sheets & Plates
- Round Bar
- Forgings
- Welding Electrodes
We are industrial suppliers of Nickel Alloy 200 Products