ASTM B166 Inconel 601 Wire manufacturer & exporter
 

Home / Products / Nickel Alloys / Inconel 601 / ASTM B166 Inconel 601 Wire

Inconel 601 (UNS: N06601, Werkstoff Nr.: 2.4851)

Inconel 601 is a nickel-chromium alloy used for applications that require resistance to corrosion and heat. This nickel alloy stands out due to its resistance to high temperature oxidation, remaining highly resistant to oxidation through 2200° F. Alloy 601 develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling. This nickel alloy has good high temperature strength, and retains its ductility after long service exposure. It has good resistance to aqueous corrosion, high mechanical strength, and is readily formed, machined and welded. Inconel 601’s properties make it a material of broad utility in fields like thermal processing, chemical processing, pollution control, aerospace, and power generation. However, alloy 601 is not suggested for use in strongly reducing, sulfur bearing environments.

ASTM B166 Inconel 601 Wire

Specifications

Standards Designation
ASTM B 166
ASME SB 166

UNS N06601
Werkstoff Nr. 2.4851

Sizes Availability
0.4mm
available
0.5mm
available
0.8mm
available
1mm
available
1.2mm
available
1.6mm
available
2mm
available
2.5mm
available
3mm
available
4mm
available
5mm
available

Enquiry

Dimensions

Inconel 601 is a nickel-chromium-iron alloy. Inconel 601 is a general purpose engineering material that require resistance to heat & corrosion. Inconel 601 has outstanding resistance to high temperature oxidation.

Chemical Composition

Inconel 601
Ni 58.0 – 63.0
Cr 21.0 – 25.0
Fe Balance
Al 1.0 – 1.7
C 0.10 max
Mn 1.0 max
S 0.015 max
Si 0.5 max
Cu 1.0 max

Mechanical & Physical Properties – Inconel 601

Density 8.1 g/cm3
Melting Point 1411 °C (2571 °F)
Tensile Strength Psi – 80,000 , MPa – 550
Yield Strength (0.2%Offset) Psi – 30,000 , MPa – 205
Elongation 30 %

Subcategory: Metal; Nickel Base; Superalloy

Key Words: Inconel 601, Nickel-Chromium Alloy; Werkstoff Nr. 2.4851, UNS N06601; ASME Boiler Code Section VIII; AMS 5715, AMS 5870; ASTM B166, ASTM B167, ASTM B168; DIN 17742, 17750 - 17752

Component Wt. %
Al 1 - 1.7
C Max 0.1
Cr 21 - 25
Component Wt. %
Cu Max 1
Fe 13
Mn Max 1
58 - 63
Component Wt. %
Ni
S Max 0.015
Si Max 0.5
Standard product forms are round, flats, forging stock, pipe, tube, plate, sheet, strip, and wire.

Electrical Properties
Electrical Resistivity 0.000119 ohm-cm 0.000119 ohm-cm  
Magnetic Permeability 1.003 1.003  at 200 oersted (15.9 kA/m)
Curie Temperature Max -196 °C Max -321 °F

Thermal Properties
CTE, linear 20°C 13.75 µm/m-°C 7.64 µin/in-°F  20-100°C
Heat Capacity 0.448 J/g-°C 0.107 BTU/lb-°F  
Thermal Conductivity 11.2 W/m-K 77.7 BTU-in/hr-ft²-°F  
Melting Point 1360 - 1411 °C 2480 - 2570 °F  
Solidus 1360 °C 2480 °F  
Liquidus 1411 °C 2570 °F  

Main Export Market

  • Eastern Europe
  • North America
  • Mid East/Africa
  • Central/South America
  • Asia
  • Western Europe
  • Australasia
  • UAE

Sales Locations

U.A.E,
Oman,
Saudi Arabia,
Qatar,
Bahrain,
Egypt,
Turkey
Singapore,
Thailand,
Malaysia
Indonesia
Poland
Italy
Portugal
Spain
Brazil
Chile
Venezuela
Costa Rica
USA
Canada
Angola
Sri Lanka
Russia

 

     

Nickel Alloys

PRODUCTS


Worldmap | Suppliers of Stainless Steel Industrial & Construction Products Worldwide
We are industrial suppliers of Nickel Alloy 200 Products
      
Copyright © KALIKUND STEEL & ENGG. CO. All Rights Reserved | Pipingmart.com
+(91)-(22)- 66151930
+(91)-(22)- 66109605