Home / Products / Nickel Alloys / Inconel 601 / ASTM B366 Inconel 601 Butt welding Fittings
Inconel 601 (UNS: N06601, Werkstoff Nr.: 2.4851)
Our traded products include nickel alloy butt weld fittings that are extensively used in diverse industries. These butt weld fittings conform to rds. Various grades of nickel alloy butt weld pipe fittings are.
ASTM B366 Inconel 601 Butt welding Fittings
Specifications
| Standards | Designation |
| ASTM | B 366 |
| ASME | SB 366 |
| UNS | N06601 |
| Werkstoff Nr. | 2.4851 |
Dimensions
Click on below for dimensions & size:
- Inconel fittings
- Inconel 90° Long Radius Elbow
- Inconel Elbow
- Inconel 90° Short Radius Elbow
- Inconel 45° Long Radius Elbow
- Inconel 45° Short Radius Elbow
- Inconel 180° Long Radius Elbow
- Inconel 180° Short Radius Elbow
- Inconel 1D Elbow
- Inconel 1.5D Elbow
- Inconel 3D Elbow
- Inconel 5D Elbow
- Inconel Seamless Buttwelding 45° and 90° Elbows
- Inconel Welded Elbows
- Inconel Seamless Buttwelding 180° Returns
- Inconel Straight Tees and Crosses
- Inconel Reducing Outlet Tees and Reducing Outlet Crosses
- Inconel Tee
- Inconel Equal Tee
- Inconel Reducing Tee
- Inconel Equal Cross
- Inconel Reducing Cross
- Inconel Reducers
- Inconel Concentric Reducer
- Inconel Eccentric Reducer
- Inconel Stub End
- Inconel Lap Joint Stub Ends
- Inconel Long Stubend
- Inconel Short Stubend
- Inconel Pipe Cap
- Inconel Caps
- Inconel End Cap
- Inconel Collar
- Inconel Swedge Nipple
- Inconel Pipe Nipples
- Inconel Barrel Nipple
- Inconel Reducing Nipple
- Inconel Bend
- Inconel Long Radius Bend
- Inconel Piggable Bend
- Inconel Lateral
Inconel 601 is a nickel-chromium-iron alloy. Inconel 601 is a general purpose engineering material that require resistance to heat & corrosion. Inconel 601 has outstanding resistance to high temperature oxidation.
Chemical Composition
| Inconel 601 | |
| Ni | 58.0 – 63.0 |
| Cr | 21.0 – 25.0 |
| Fe | Balance |
| Al | 1.0 – 1.7 |
| C | 0.10 max |
| Mn | 1.0 max |
| S | 0.015 max |
| Si | 0.5 max |
| Cu | 1.0 max |
Mechanical & Physical Properties – Inconel 601
| Density | 8.1 g/cm3 |
| Melting Point | 1411 °C (2571 °F) |
| Tensile Strength | Psi – 80,000 , MPa – 550 |
| Yield Strength (0.2%Offset) | Psi – 30,000 , MPa – 205 |
| Elongation | 30 % |
Subcategory: Metal; Nickel Base; Superalloy
Key Words: Inconel 601, Nickel-Chromium Alloy; Werkstoff Nr. 2.4851, UNS N06601; ASME Boiler Code Section VIII; AMS 5715, AMS 5870; ASTM B166, ASTM B167, ASTM B168; DIN 17742, 17750 - 17752
| Component Wt. % Al 1 - 1.7 C Max 0.1 Cr 21 - 25 |
Component Wt. % Cu Max 1 Fe 13 Mn Max 1 58 - 63 |
Component Wt. % Ni S Max 0.015 Si Max 0.5 |
| Standard product forms are round, flats, forging stock, pipe, tube, plate, sheet, strip, and wire. | ||
| Electrical Properties | |||
| Electrical Resistivity | 0.000119 ohm-cm | 0.000119 ohm-cm | |
| Magnetic Permeability | 1.003 | 1.003 | at 200 oersted (15.9 kA/m) |
| Curie Temperature | Max -196 °C | Max -321 °F | |
| Thermal Properties | |||
| CTE, linear 20°C | 13.75 µm/m-°C | 7.64 µin/in-°F | 20-100°C |
| Heat Capacity | 0.448 J/g-°C | 0.107 BTU/lb-°F | |
| Thermal Conductivity | 11.2 W/m-K | 77.7 BTU-in/hr-ft²-°F | |
| Melting Point | 1360 - 1411 °C | 2480 - 2570 °F | |
| Solidus | 1360 °C | 2480 °F | |
| Liquidus | 1411 °C | 2570 °F | |
Main Export Market
- Eastern Europe
- North America
- Mid East/Africa
- Central/South America
- Asia
- Western Europe
- Australasia
- UAE
U.A.E,
Oman,
Saudi Arabia,
Qatar,
Bahrain,
Egypt,
Turkey
Singapore,
Thailand,
Malaysia
Indonesia
Poland
Italy
Portugal
Spain
Brazil
Chile
Venezuela
Costa Rica
USA
Canada
Angola
Sri Lanka
Russia
