Home / Products / Nickel Alloys / Inconel 625 / ASTM B366 Inconel 625 Flanges
Inconel 625 (UNS: N06625, Werkstoff Nr.: 2.4856)
we are a company focused on engineering and business activities in the area of environmental technologies. Our Product Supply Division offers a broad portfolio of Steel Flanges and ASTM B366 Inconel 625 Flanges. When you place an order with Kalikund Steel & Engineering Co. you will receive the products that will stand up in service from people that will stand behind their product.
ASTM B366 Inconel 625 Flanges
Specifications
| Standards | Designation |
| ASTM | B 366 |
| ASME | SB 366 |
| UNS | N06625 |
| Werkstoff Nr. | 2.4856 |
Dimensions
- Inconel Flanges
- Inconel 625 Forged Flanges
- Inconel 625 Flanges Blind Flanges
- Inconel 625 Spectacle Blinds
- Inconel 625 High Hub Blinds
- Inconel 625 Flanges Orifice Flanges
- Inconel 625 Flanges Slip-on Flanges
- Inconel 625 Flanges Socket Weld Flanges
- Inconel 625 Flanges Weld Neck Flanges
- Inconel 625 Flanges Flat Flanges
- Inconel 625 Flanges Loose Flanges
- Inconel 625 Flanges Threaded Flanges
- Inconel 625 Flanges Lapped joint Flanges
- Inconel 625 Reducing Flanges
- Inconel 625 Weld Neck Flanges Series A or B
- Inconel 625 Flanges Square Flanges
- Inconel 625 Groove & Tongue Flanges
- Inconel 625 Long Neck Weld Flanges
- Inconel 625 WNRF Flanges
- Inconel 625 BLRF Flanges
- Inconel 625 SORF Flanges
- Inconel 625 Screwed Flanges
- Inconel 625 Ring Type Joint Flanges
- Inconel 625 RTJ Flanges
- Inconel 625 SWRF Flanges
- Flange Facing Type & Finish
- Inconel 625 Flanges Spades and Ring Spacers (part of flange connection)
- Inconel 625 Flanges Weldo Flange / Nipo Flange
- Inconel 625 Flanges Expander Flange
- ANSI / ASA B16.5 FLANGE
- ANSI B16.47 FLANGE
- DIN FLANGE PN6-PN40
- UNI FLANGE PN6-PN40
- EN 1092-1 FLANGE PN6-PN40
- JIS B 2220 FLANGE
- BS 4504 FLANGE PN6-PN40
- BS 10 FLANGE
- SABS / SANS 1123 FLANGE
- GOST / ГОСТ 12820-80 Flange
- GOST / ГОСТ 12821-80 Flange
- MSS SP44 FLANGE
- API FLANGE
- AWWA C207 FLANGE
- ISO FLANGE
- FRENCH NFE 29203 FLANGE
- AUSTRALIAN FLANGE
- NORWEGIAN NS FLANGE
- SWISS VSM FLANGE
- KOREAN FLANGES
Chemical Composition
| Inconel 625 | |
| Ni | 58.0 min |
| Cr | 20.0 – 23.0 |
| Fe | 5.0 max |
| C | 0.10 max |
| Mn | 0.50 max |
| Si | 0.50 max |
| Mo | 8.0 – 10.0 |
| Co | 1.0 max |
| Al | 0.40 max |
| Ti | 0.40 max |
| Nb + Ta | 3.15 – 4.15 |
| P | 0.015 max |
| S | 0.015 max |
Mechanical & Physical Properties – Inconel 625
| Density | 8.4 g/cm3 |
| Melting Point | 1350 °C (2460 °F) |
| Tensile Strength | Psi – 135,000 , MPa – 930 |
| Yield Strength (0.2%Offset) | Psi – 75,000 , MPa – 517 |
| Elongation | 42.5 % |
Subcategory: Nickel Alloys; Metal; Nickel Base; Superalloy
Key Words: Inconel Flanges, Inconel 625 Flanges, Inconel Flange, Inconel 625 Flange
| Component Al C Co Cr Fe |
Wt. % Max 0.4 Max 0.1 Max 1 20 - 23 Max 5 |
| Component Mn Mo Nb Ni |
Wt. % Max 0.5 8 - 10 3.15 - 4.15 Min 58 |
| Electrical Properties | |||
| Electrical Resistivity | 0.000129 ohm-cm | 0.000129 ohm-cm | |
| Magnetic Permeability | 1.0006 | 1.0006 | at 200 oersted (15.9 kA/m) |
| Curie Temperature | Max -196 °C | Max -321 °F | |
| Thermal Properties | |||
| CTE, linear 20°C | 12.8 µm/m-°C | 7.11 µin/in-°F | 20-100°C |
| Heat Capacity | 0.41 J/g-°C | 0.098 BTU/lb-°F | |
| Thermal Conductivity | 9.8 W/m-K | 68 BTU-in/hr-ft²-°F | |
| Melting Point | 1290 - 1350 °C | 2350 - 2460 °F | |
| Solidus | 1290 °C | 2350 °F | |
| Liquidus | 1350 °C | 2460 °F | |
