Home / Products / Nickel Alloys / Inconel 625 / ASTM B366 Inconel 625 Butt welding Fittings
Inconel 625 (UNS: N06625, Werkstoff Nr.: 2.4856)
We manufacture & export inconel 625 alloy buttweld fittings cratering petroleum industries, oil refinning sector, filteration industries, piping industries, paper & puld industries, power plants etc. Catering to such technical sectors require superior & consitent quality butt-weld pipe fittings.
ASTM B366 Inconel 625 Butt welding Fittings
Specifications
| Standards | Designation |
| ASTM | B 366 |
| ASME | SB 366 |
| UNS | N06625 |
| Werkstoff Nr. | 2.4856 |
Dimensions
Click on below for dimensions & size:
- Inconel fittings
- Inconel 90° Long Radius Elbow
- Inconel Elbow
- Inconel 90° Short Radius Elbow
- Inconel 45° Long Radius Elbow
- Inconel 45° Short Radius Elbow
- Inconel 180° Long Radius Elbow
- Inconel 180° Short Radius Elbow
- Inconel 1D Elbow
- Inconel 1.5D Elbow
- Inconel 3D Elbow
- Inconel 5D Elbow
- Inconel Seamless Buttwelding 45° and 90° Elbows
- Inconel Welded Elbows
- Inconel Seamless Buttwelding 180° Returns
- Inconel Straight Tees and Crosses
- Inconel Reducing Outlet Tees and Reducing Outlet Crosses
- Inconel Tee
- Inconel Equal Tee
- Inconel Reducing Tee
- Inconel Equal Cross
- Inconel Reducing Cross
- Inconel Reducers
- Inconel Concentric Reducer
- Inconel Eccentric Reducer
- Inconel Stub End
- Inconel Lap Joint Stub Ends
- Inconel Long Stubend
- Inconel Short Stubend
- Inconel Pipe Cap
- Inconel Caps
- Inconel End Cap
- Inconel Collar
- Inconel Swedge Nipple
- Inconel Pipe Nipples
- Inconel Barrel Nipple
- Inconel Reducing Nipple
- Inconel Bend
- Inconel Long Radius Bend
- Inconel Piggable Bend
- Inconel Lateral
Chemical Composition
| Inconel 625 | |
| Ni | 58.0 min |
| Cr | 20.0 – 23.0 |
| Fe | 5.0 max |
| C | 0.10 max |
| Mn | 0.50 max |
| Si | 0.50 max |
| Mo | 8.0 – 10.0 |
| Co | 1.0 max |
| Al | 0.40 max |
| Ti | 0.40 max |
| Nb + Ta | 3.15 – 4.15 |
| P | 0.015 max |
| S | 0.015 max |
Mechanical & Physical Properties – Inconel 625
| Density | 8.4 g/cm3 |
| Melting Point | 1350 °C (2460 °F) |
| Tensile Strength | Psi – 135,000 , MPa – 930 |
| Yield Strength (0.2%Offset) | Psi – 75,000 , MPa – 517 |
| Elongation | 42.5 % |
Subcategory: Metal; Nickel Base; Superalloy
Key Words: ASME SB-443, SB-444, SB-446, SB-564, Boiler Code Sections I, III, VIII, IX; AFNOR NC 22 D Nb; VdTUV 499, AMS 5581, AMS 5599, AMS 5666, AMS 5837; DIN 17744, 17750-17752, 17754; Werkstoff Nr. 2.4856; NACE MR-01-75, UNS N06625; BS 3072, 3074, 3076 (NA21); ASTM B443, ASTM B444, ASTM B446, ASTM B564, ASTM B704, ASTM B705, ASTM B751
| Component Al C Co Cr Fe |
Wt. % Max 0.4 Max 0.1 Max 1 20 - 23 Max 5 |
| Component Mn Mo Nb Ni |
Wt. % Max 0.5 8 - 10 3.15 - 4.15 Min 58 |
| Electrical Properties | |||
| Electrical Resistivity | 0.000129 ohm-cm | 0.000129 ohm-cm | |
| Magnetic Permeability | 1.0006 | 1.0006 | at 200 oersted (15.9 kA/m) |
| Curie Temperature | Max -196 °C | Max -321 °F | |
| Thermal Properties | |||
| CTE, linear 20°C | 12.8 µm/m-°C | 7.11 µin/in-°F | 20-100°C |
| Heat Capacity | 0.41 J/g-°C | 0.098 BTU/lb-°F | |
| Thermal Conductivity | 9.8 W/m-K | 68 BTU-in/hr-ft²-°F | |
| Melting Point | 1290 - 1350 °C | 2350 - 2460 °F | |
| Solidus | 1290 °C | 2350 °F | |
| Liquidus | 1350 °C | 2460 °F | |
Main Export Market
- Eastern Europe
- North America
- Mid East/Africa
- Central/South America
- Asia
- Western Europe
- Australasia
- UAE
U.A.E,
Oman,
Saudi Arabia,
Qatar,
Bahrain,
Egypt,
Turkey
Singapore,
Thailand,
Malaysia
Indonesia
Poland
Italy
Portugal
Spain
Brazil
Chile
Venezuela
Costa Rica
USA
Canada
Angola
Sri Lanka
Russia
