Home / Products / Nickel Alloys / Monel / Monel 400 / ASTM B366 Monel 400 Socket weld Fittings
we are a company focused on engineering and business activities in the area of environmental technologies. Our Product Supply Division offers a broad portfolio of Steel Flanges and ASTM B366 Monel 400 Socket weld Fittings. When you place an order with Kalikund Steel & Engineering Co. , you will receive the products that will stand up in service from people that will stand behind their product.
ASTM B366 Monel 400 Socket weld Fittings
Specifications
| Standards | Designation |
| ASTM | B 366 |
| ASME | SB 366 |
| Monel 400 Standards | |
|---|---|
| UNS | N04400 |
| Werkstoff Nr. | 2.4360 |
We can supply all type Monel Fittings as mentioned below, click on below for size & specification:
- Monel Elbow
- Monel pipe elbow
- Monel 90° Long Radius Elbow
- Monel 90° Short Radius Elbow
- Monel 45° Long Radius Elbow
- Monel 45° Short Radius Elbow
- Monel 180° Long Radius Elbow
- Monel 180° Short Radius Elbow
- Monel 1D Elbow
- Monel 1.5D Elbow
- Monel 3D Elbow
- Monel 5D Elbow
- Monel Seamless Buttwelding 45° and 90° Elbows
- Monel Welded Elbows
- Monel Seamless Buttwelding 180° Returns
- Monel Straight Tees and Crosses
- Monel Reducing Outlet Tees and Reducing Outlet Crosses
- Monel Tee
- Monel Equal Tee
- Monel Reducing Tee
- Monel Equal Cross
- Monel Reducing Cross
- Monel Reducers
- Monel Concentric Reducer
- Monel Eccentric Reducer
- Monel Stub End
- Monel Lap Joint Stub Ends
- Monel Long Stubend
- Monel Short Stubend
- Monel Pipe Cap
- Monel End Cap
- Monel Collar
- Monel Swedge Nipple
- Monel Pipe Nipples
- Monel Barrel Nipple
- Monel Reducing Nipple
- Monel Bend
- Monel Long Radius Bend
- Monel Piggable Bend
- Monel Lateral
Read more about Monel pipe fittings
Dimensions
Chemical Composition
| Monel 400 | |
| Ni | 63.0 min |
| Fe | 1.0 – 2.5 |
| C | 0.3 max |
| Mn | 2.0 max |
| Si | 0.5 max |
| Cu | 28.0 – 34.0 |
| Al | 0.50 max |
| S | 0.02 max |
Mechanical & Physical Properties – Monel 400
| Density | 8.8 g/cm3 |
| Melting Point | 1350 °C (2460 °F) |
| Tensile Strength | Psi – 80000 , MPa – 550 |
| Yield Strength (0.2%Offset) | Psi – 35000 , MPa – 240 |
| Elongation | 40 % |
